BFSBQ - ENAMEL ALKYD SG
- MSDS: BFSBQ
- Manufacturer: PRATT AND LAMBERT
- Product Name: ENAMEL ALKYD SG
- National Stock Number: 8010-00-841-1242
Product Identification
Product ID:ENAMEL ALKYD SG
MSDS Date:01/01/1987
FSC:8010
NIIN:00-841-1242
MSDS Number: BFSBQ
Responsible Party
Emergency Phone: 800-424-9300, NITE
Cage: PRATT
Contractor
Telephone: 800-647-2253
Cage: 92216
Ingredients
METHYL ALCOHOL (METHANOL) (SARA III)
CAS: 67-56-1
RTECS: PC1400000
Fraction By Weight: <0.5%
OSHA PEL S,200PPM/250STEL
ACGIH TLV: S,200PPM/250STEL; 93
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS: 8030-30-6
RTECS: SE7555000
Fraction By Weight: 30%
OSHA PEL 100 PPM
ISOBUTYL ALCOHOL
Fraction By Weight: <0.5%
ACGIH TLV: 50PPM
Hazards
Effects of Overexposure:INH: RESP TRACT. IRRIT. NERVOUS SYSTEM DEPRESS.
SKIN/EYE IRRIT.
First Aid
First Aid:FLUSH SKIN/EYES W/WATER. REMOVE CONTAM CLOTHING. REMOVE TO
FRESH AIR, CALL MD IF NEC.
Fire Fighting
Flash Point:104F, 40C TCC
Lower Limits:1.10
Extinguishing Media:C02, FOAM, DRY CHEM, POLYMER FOAM
Fire Fighting Procedures:SELF-CNTND BRTHNG APPARATUS. WATER - USE FOG
NOZZ.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENT AREA.
REMOVE W/INERT ABSORBENT, NONSPARKING TOOLS.
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120F
Other Precautions:GROUND CNTNRS WHILE POURING. AVOID EXCESS FREE FALL
OF LIQ. DO NOT FLAMECUT, BRAZE, WELD W/O RESP OR VENT. ADD LABEL
WARNING. DO NOT TAKE INTERN.
Exposure Controls
Respiratory Protection:OUTDOOR, USE MECH FILTER RESP. CLOSED, CHEM
MECH.
Ventilation:GEN DILUTION, LOCAL EXHST
Protective Gloves:REQ
Eye Protection:SPLASH GOGGLES
Other Protective Equipment:PREVENT PROLONGED SKIN CNTCT TO CONTAM
CLOTHING
Supplemental Safety and Health
DAY EMER #316-733-1361. BOILING RANGE: 155-189.4C. RESP PROT: CONFINED
AREAS, USE AIRLINE TYPE RESP.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:311-373F
Vapor Pres:97
Evaporation Rate & Reference:
Percent Volatiles by Volume:59.0
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:FIRES, HEAT, HOT SURFACES
Disposal
Waste Disposal Methods:DISPOSE IAW LOCAL, STATE, FED REG. DO NOT
INCINERATE CLOSED CNTNRS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.